Overview
This aftermarket edger blade is designed as a replacement for the factory blade on EGO 56V battery-powered edgers and edger attachments, as well as select Toro and Echo models. Edger blades take a beating every time they slice through compacted soil and scrape along concrete curbs, so they dull and chip over the course of a season. Swapping in a fresh blade restores clean, defined edges along driveways, sidewalks, and garden beds.
Key specifications
- Blade length: 8 in.
- Material: Hardened steel
- Compatible OEM part numbers: EGO EA0800 blade, Toro 139-5385 / 145-4873, Echo 99944200470 / 99944200475
Compatibility
Fits EGO edger models EA0800, ED0800, and ED0804; Toro Flex-Force 60V stick edgers 51833, 51833T, 88710, and 88715; and Echo gas-powered and attachment edgers PAS-225VP, PAS-2620, PE-225, PE-2620, PE-200, PE-210, PE-260, DPE-2100, and DPE-2600. Verify your specific model and blade dimensions before purchasing, as blade mounting configurations differ between brands.
Installation notes
Disconnect the battery or spark plug and ensure the blade has stopped rotating. Remove the blade mounting bolt and washer, then pull the old blade off the arbor. Seat the new blade onto the arbor shaft, replace the washer, and hand-tighten the bolt before finishing with a wrench to the manufacturer’s specified torque. Spin the blade by hand after installation to confirm it rotates freely without contacting the blade guard or housing.
Common questions
Q: Will this replacement blade fit my Ego ED0804 edger, or is it only for the EA0800 attachment?
Yes, this blade is made to fit the Ego EA0800, ED0800, and ED0804 models listed. If your tool matches one of those exact model numbers, it should be the correct replacement blade for proper fit and operation.
Q: Do I need any special tools to install this blade on an ED0800, and which way does the blade face?
Installation is straightforward and typically just requires removing the retaining hardware from the old blade and reinstalling it on the new one. Make sure the edger is powered off with the battery removed, and reinstall the blade in the same orientation as the original so the cutting edge tracks correctly along the trench.
Q: How do I know when this Ego edger blade needs to be replaced instead of just cleaned?
Replace the blade when the edge is noticeably rounded, chipped, bent, or if the edger starts cutting slower and wandering during use. Cleaning off packed dirt and grass after each job helps, but once the blade diameter or cutting edge is worn down, replacement is the better option for clean, consistent edging.
